About Electricity Cost Calculator
How much does it really cost to run the air conditioner for eight hours, leave a space heater on all evening, or keep a gaming PC running every night? This calculator turns an appliance's wattage and daily running time into kilowatt-hours, multiplies that by the price you pay per kWh, and shows the daily, monthly and yearly cost in one line.
It is not tied to any country or currency: enter your local tariff and the answer comes back in the same currency. Results update the moment you change a value, so you can compare two appliances or see what cutting an hour a day would save. Figures are estimates based on rated power; real-world usage depends on how the device cycles and on how your utility structures its tariff.
Why use it
- Pinpoints which appliances drive your electricity bill.
- Compares the running costs of two products before you buy.
- Shows instantly how reducing daily hours affects monthly spending.
- Works with any currency, because you supply your own price per kWh.
- Updates live as you type, with no button to press.
How to use
Enter the wattage
Type the appliance's power in watts, usually printed on its rating label or in the manual. The default is 1500 W.
Enter daily hours
Type how many hours a day it runs. Fractions such as 0.5 for half an hour are fine.
Enter your price per kWh
Use the rate from your electricity bill or your supplier's tariff page, in your own currency.
Read the costs
You see the daily cost with kWh used, then monthly (30 days) and yearly (365 days) totals.
Examples
Air conditioner in summer
A 2000 W unit running 8 hours a day at 0.10 per kWh uses 16 kWh daily: 1.60 a day and 48.00 a month at full power.
Electric water heater
A 3000 W heater on for 2 hours at 0.12 per kWh uses 6 kWh: 0.72 a day, 21.60 a month and 262.80 a year.
Laptop for remote work
A 65 W charger running 8 hours at 0.20 per kWh uses 0.52 kWh a day, about 3.12 a month.
Space heater in winter
A 1500 W heater for 4 hours at 0.18 per kWh uses 6 kWh: 1.08 a day and 32.40 a month.
| Appliance | Typical power | Usage note |
|---|---|---|
| LED bulb | 8–15 W | Very low running cost |
| Laptop charger | 45–100 W | Draws less once the battery is full |
| LED TV | 60–150 W | Varies with screen size and brightness |
| Refrigerator | 100–250 W | Compressor runs only part of the time |
| Washing machine | 500–2000 W | Most energy goes into heating water |
| Split air conditioner | 1000–2500 W | Drops once the room reaches the set temperature |
| Kettle or water heater | 1500–3000 W | High power for short periods |
Tips
- Fridges, freezers and air conditioners cycle on and off, so enter the hours the compressor actually runs, not 24, for a realistic figure.
- If your currency has three decimal places, such as the Kuwaiti or Bahraini dinar or the Omani rial, set Decimal places to 3 so costs show to the fils or baisa.
- On tiered tariffs, use the rate for the tier your monthly usage usually falls into.
- For accurate numbers, measure the real draw with a plug-in energy meter and enter that wattage.
- Compare appliances by yearly running cost: a pricier but efficient model can pay for itself over a few years.
All calculations run in your browser; the values you enter are never sent to a server.
Frequently asked questions
How do I calculate an appliance's electricity use?
Multiply its wattage by the hours it runs, then divide by 1000 to get kWh. A 1500 W heater running 4 hours uses 6 kWh. The calculator does this for you and applies your price.
What is the difference between watts and kilowatt-hours?
Watts measure how much power a device draws at a given moment. Kilowatt-hours measure energy used over time, which is what your utility bills you for. 1000 watts running for one hour equals 1 kWh.
Where do I find the wattage?
Look at the rating label on the back or underside of the appliance, or in its manual, marked in W. If it lists only volts and amps, multiply them for a rough wattage.
How do I find my price per kWh?
Check your electricity bill or your supplier's tariff page. If the bill only shows the total and kWh used, divide the amount by the kWh for your average rate.
Will the result match my bill?
Treat it as an estimate. Bills include standing charges, taxes and tiered rates, and many devices draw less than their rated power, so the calculator is best for comparisons and planning.
How are monthly and yearly costs worked out?
Monthly cost is the daily cost times 30, and yearly cost is the daily cost times 365, assuming the same daily usage throughout.
How much does it cost to run an air conditioner?
It depends on wattage, hours and your rate. A 2000 W unit running 8 hours uses about 16 kWh a day at full power; in practice it is usually less because the compressor pauses once the room is cool.
Why does my fridge look so expensive?
Entering 24 hours assumes the compressor never stops, which overstates usage. For a closer estimate, use the annual kWh figure on its energy label where available.
Can I enter fractional hours?
Yes. Enter 0.5 for half an hour or 0.25 for 15 minutes, which is useful for kettles, irons and hair dryers.
What currency does it use?
Whatever currency your price per kWh is in. The calculator does not convert currencies or assume a particular one.
Why do I see 0.00 for some devices?
Usually the price is tiny and the result is shown with two decimals. For three-decimal currencies, set Decimal places to 3 to see small amounts more precisely.
Can I calculate several appliances at once?
It handles one device at a time. Work out each one and add them up, or combine the wattage of devices that run for the same number of hours.
Do devices on standby use electricity?
Many draw a few watts continuously. Enter a typical standby wattage with 24 hours to see the yearly cost; across many devices it adds up.
Last updated: